{"title":"2015-2026 WRX Stage 1 Intake Upgrades","description":null,"products":[{"product_id":"aluminum-turbo-inlet-subaru-15-21-wrx","title":"OVERTAKE Aluminum Turbo Inlet - Subaru 2015-2021 WRX, 2014-2018 Forester XT","description":"\u003ch3\u003e\u003cstrong\u003eStronger, Smoother, 5-10HP+ | Don't Risk the Crack Anymore!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDitch your WRX’s weak plastic turbo inlet and upgrade to the \u003cstrong\u003eOvertake Aluminum Turbo Version\u003c\/strong\u003e. Designed for 2015–2021 WRX models, this high-strength aluminum piece improves airflow and adds 5–10 horsepower, all while eliminating the risk of cracks common in the OEM part.\u003c\/p\u003e\n\u003cp\u003eOur Turbo Inlet Kit includes interchangeable aluminum fittings that allow the inlet to fit perfectly on both the 2015-16 WRX models as well as 2017-21 WRX models with the updated PCV connector. This inlet is a heavier duty replacement for OEM Subaru 14462AA571, 14462AA570 for 2015-16 WRX, 2014-16 FXT and 14462AA660 for 2017-21 WRX, 2017-18 FXT.\u003c\/p\u003e\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo More Cracking:\u003c\/strong\u003e Made from durable A380 cast aluminum to replace brittle factory plastic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo Tune Required: \u003c\/strong\u003eWorks with stock tuning and over OVERTAKE intake components including our \u003ca href=\"https:\/\/overtakeusa.com\/products\/overtake-maxxflo-intake-panel-filter-subaru-2008-21-wrx-2008-18-sti-2009-18-forester-2013-17-crosstrek-2005-17-legacy-outback\"\u003epanel air filter\u003c\/a\u003e and \u003ca href=\"https:\/\/overtakeusa.com\/products\/post-maf-hose-kit-subaru-15-21-wrx\" title=\"Overtake Post MAF Hose Kit - Subaru 15-21 WRX\"\u003epost MAF hoses\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Airflow:\u003c\/strong\u003e CAD-optimized design improves intake efficiency and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fit:\u003c\/strong\u003e CNC-machined for OEM fit—no cutting or mods needed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Install:\u003c\/strong\u003e Drop-in replacement with high-quality clamps and seals included. Designed to fit with the OEM boost solenoid and most aftermarket electronic boost controllers, including the \u003ca title=\"Overtake Boost Control Solenoid 2015 Subaru WRX\" href=\"https:\/\/overtakeusa.com\/products\/boost-control-solenoid-subaru-15-21-wrx\"\u003eOvertake Electronic Boost Control Solenoid\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePrevents boost leaks and misfires caused by cracked stock inlets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnsures consistent, metered airflow for better engine efficiency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports future intake upgrades for even more performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGet reliable power and protection—upgrade to the Overtake Aluminum Turbo Inlet today.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITMENT NOTES - \u003c\/strong\u003eAll USDM 15-21 WRX and 14-18 FXT models\/trims and most international trims EXCEPT 17-21 Canadian models equipped with a factory aluminum inlet.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":45035455316099,"sku":"A10243","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10243-overtake-aluminum-fa20-inlet-17.jpg?v=1769698735"},{"product_id":"overtake-post-maf-intake-hose-kit-subaru-2015-2021-wrx","title":"OVERTAKE Post MAF Intake Hose Kit - Subaru 2015-2021 WRX","description":"\u003ch4\u003e\u003cstrong\u003eOVERTAKE Post MAF Hose Kit for the 2015-21 WRX | Improve Airflow \u0026amp; Boost Performance\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMaximize airflow and increase engine performance with the \u003cstrong\u003eOVERTAKE Post MAF Hose Kit\u003c\/strong\u003e for the \u003cstrong\u003e2015-21 Subaru WRX\u003c\/strong\u003e. Designed to enhance both power and aesthetics, this high-performance aftermarket upgrade is engineered to replace the factory post MAF hoses and deliver smoother airflow, better throttle response, and more horsepower. Perfect for enthusiasts looking to improve their vehicle's intake system, the Overtake Post MAF Hose Kit is the ideal solution for maximizing your car's potential. This hose is a heavier duty replacement for OEM Subaru \u003cspan\u003e46013VA000, 46013AJ010.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Airflow\u003c\/strong\u003e: Smooth inner surface eliminates turbulence-causing pockets found in factory hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Ply Silicone Construction\u003c\/strong\u003e: Durable and flexible, reinforced with stainless steel wire to prevent collapse under vacuum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapered End Design\u003c\/strong\u003e: Optimized inner diameter for a perfect fit with the OEM airbox and throttle body, ensuring smooth airflow and preventing vortexes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: OEM fitment requires no modifications for a quick, plug-and-play upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in Red or Black or OVERTAKE Blue\u003c\/strong\u003e: Choose the color that complements your engine bay style.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Hose Clamps\u003c\/strong\u003e: Secure fitment and enhanced durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Tuning Required\u003c\/strong\u003e: Enjoy improved performance without the need for additional tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy Choose the Overtake Post MAF Hose Kit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Post MAF Hose Kit\u003c\/strong\u003e is designed to optimize the flow of air into your engine by addressing the common issues found in factory post MAF hoses. The OEM rubber hoses are made with sharp bends and corrugated folds that disrupt airflow, creating high- and low-pressure spots that can affect engine efficiency. Our \u003cstrong\u003ePost MAF Hose Kit\u003c\/strong\u003e solves these problems by providing smoother airflow paths and a tapered design to ensure a seamless transition from the airbox to the throttle body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapered End Design for Optimized Airflow\u003c\/strong\u003e: One of the most important features of the OVERTAKE Post MAF Hose Kit is its tapered end design. By ensuring that the inner diameter of the hose perfectly matches the OEM airbox and throttle body, we eliminate flow disruptions caused by mismatched diameters. This design prevents vortex formation, which can cause turbulence and reduce engine performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5-Ply Silicone Construction with Stainless Steel Reinforcement\u003c\/strong\u003e: Our hoses are made with 5-ply silicone and reinforced with an internal stainless steel wire. This construction not only provides flexibility for easy installation but also ensures durability and prevents the hoses from collapsing under vacuum pressure, unlike cheaper competitor hoses.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eMethodology: How the Overtake Post MAF Hose Kit Improves on OEM Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eTo develop the best aftermarket part, we identified the shortcomings of the OEM rubber hoses. The factory hoses are made with sharp angles and corrugated folds that create uneven airflow and turbulence. The OVERTAKE Post MAF Hose Kit was designed with smooth, gradual curves to ensure consistent airflow and minimize air disruption. The tapered ends match the OEM airbox and throttle body diameters perfectly, reducing turbulence and promoting even airflow throughout the intake system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlow Testing Results\u003c\/strong\u003e: We conducted comprehensive testing, comparing the vorticity (flow disruption) between the factory hose and the OVERTAKE tapered hose. The results showed that the OVERTAKE design significantly reduces airflow turbulence, which results in more efficient engine performance and improved throttle response.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBoost Engine Performance with the Overtake Post MAF Hose Kit\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eUpgrade your \u003cstrong\u003e2015-21 Subaru WRX\u003c\/strong\u003e with the \u003cstrong\u003eOVERTAKE Post MAF Hose Kit\u003c\/strong\u003e for improved airflow, more power, and better throttle response. This easy-to-install, performance-enhancing upgrade is the perfect addition to your intake system. Whether you’re a daily driver or performance enthusiast, the OVERTAKE Post MAF Hose Kit delivers the improvements you need for a more efficient, powerful engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximize Your Airflow, Maximize Your Performance with the OVERTAKE Post MAF Hose Kit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"OVERTAKE Blue","offer_id":47799086481539,"sku":"A10133BLU","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":45037574750339,"sku":"A10133RED","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45037574783107,"sku":"A10133BLK","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10133BLU-overtake-subaru-2015-21-wrx-post-maf-blue-2_2f5f3ea0-3fb2-4430-9be0-2259b2096b0f.jpg?v=1785975217"},{"product_id":"overtake-maxx-flo-intake-panel-filter-subaru-2022-2026-wrx-2018-2026-crosstrek-2017-2026-impreza-2019-2026-ascent-2019-2025-forester-2020-2025-legacy-2020-2026-outback","title":"OVERTAKE Maxx Flo Intake Panel Filter - Subaru 2022-2026 WRX, 2018-2026 Crosstrek, 2017-2026 Impreza, 2019-2026 Ascent, 2019-2026 Forester, 2020-2025 Legacy, 2020-2026 Outback","description":"\u003ch4\u003eHigher Flow with Excellent Filtration | Overtake Maxx Flo Panel Filters\u003c\/h4\u003e\n\u003cp\u003eExperience next-level engine performance with the Overtake MaxxFlo Subaru Intake Panel Filters, delivering up to 15% more airflow compared to the factory paper filters. Built with advanced synthetic filtration media, MaxxFlo filters combine superior airflow with high-efficiency filtration. On top of that, all Overtake Panel Filters are 100% washable and reusable, so you will never need another filter for your factory airbox again!\u003c\/p\u003e\n\u003cp\u003eWith an average filtration efficiency of 98.1% as well as a 20.5g dust-holding capacity, Overtake MaxxFlo filters keep your Subaru engine cleaner for longer while maintaining optimal airflow. Our filters are tested to ISO 5011:2000 standards to ensure consistent, high-performance results. This air intake filter is a high performance replacement for OEM Subaru \u003cspan data-sheets-root=\"1\"\u003e16546AA16A, 16546AA150.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eQuick Specs:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWashable and Reusable\u003c\/li\u003e\n\u003cli\u003eUp to 15% increase in airflow for improved engine response\u003c\/li\u003e\n\u003cli\u003e98.1% filtration efficiency for superior engine protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":45851417510019,"sku":"A10341","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10341-overtake-intake-panel-filter-22_wrx-1.jpg?v=1762894536"},{"product_id":"overtake-maxxflo-intake-panel-filter-subaru-2008-21-wrx-2008-18-sti-2009-18-forester-2013-17-crosstrek-2005-17-legacy-outback","title":"OVERTAKE Maxx Flo Intake Panel Filter - Subaru 2008-2021 WRX, 2008-2018 STI, 2009-2018 Forester, 2013-2017 Crosstrek, 2005-2017 Legacy, 2005-2017 Outback","description":"\u003ch4\u003eHigher Flow with Excellent Filtration | Overtake Maxx Flo Panel Filters\u003c\/h4\u003e\n\u003cp\u003eExperience next-level engine performance with the Overtake MaxxFlo Intake Panel Filters, delivering up to 15% more airflow compared to the factory paper filters. Built with advanced synthetic filtration media, MaxxFlo filters combine superior airflow with high-efficiency filtration. On top of that, all Overtake Panel Filters are 100% washable and reusable, so you will never need another filter for your factory airbox again!\u003c\/p\u003e\n\u003cp\u003eWith an average filtration efficiency of 98.1% as well as a 20.5g dust-holding capacity, Overtake MaxxFlo filters keep your Subaru engine cleaner for longer while maintaining optimal airflow. Our filters are tested to ISO 5011:2000 standards to ensure consistent, high-performance results. This air intake filter is a high performance replacement for OEM Subaru \u003cspan data-sheets-root=\"1\"\u003e16546AA12A, 16546AA120, 16546AA10A, 16546AA090.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eQuick Specs:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWashable and Reusable\u003c\/li\u003e\n\u003cli\u003eUp to 15% increase in airflow for improved engine response\u003c\/li\u003e\n\u003cli\u003e98.1% filtration efficiency for superior engine protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":45887207473283,"sku":"A10343","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10343-overtake-intake-panel-filter-08-21-wrx-1.jpg?v=1763496433"},{"product_id":"overtake-aluminum-turbo-inlet-subaru-2022-wrx","title":"OVERTAKE Aluminum Turbo Inlet - Subaru 2022-2026 WRX","description":"\u003ch4\u003e\u003cstrong\u003eFixes the OEM boost leak | Improves Turbo Efficiency\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eDitch your VB WRX’ leaky factory turbo inlet and upgrade to the \u003cstrong\u003eOVERTAKE Aluminum Turbo Inlet\u003c\/strong\u003e. Designed for 2022+ Subaru WRX models, this high-strength aluminum piece increases airflow and improves on two big flaws in the factory inlet, allowing for superior intake temperatures and better boost response. This inlet is a high performance replacement for OEM Subaru 14460AA450.\u003c\/p\u003e\n\u003ch4\u003eKey Benefits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Tuning Required: \u003c\/strong\u003eWorks with stock tune as well as other OVERTAKE intake components such as the \u003cstrong\u003e\u003ca href=\"https:\/\/overtakeusa.com\/collections\/maxxflo-air-filters?\" title=\"Overtake Maxx Flo Air Filters\"\u003eOVERTAKE MaxxFlo Panel Filters\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEliminates persistent boost leak that is present with the OEM Subaru inlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo more coolant heating up the air entering your engine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnsures consistent, metered airflow for better engine efficiency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports future intake upgrades for even more performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/qeLzNUuKEDk?si=h7cmXk6pmTLiATyd\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/h4\u003e\n\u003ch4\u003eThe Results?\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe data-external=\"1\" height=\"496\" style=\"width: 0; min-width: 100% !important; border: none;\" src=\"https:\/\/datawrapper.dwcdn.net\/Mqbzn\/2\/\" id=\"datawrapper-chart-Mqbzn\" aria-label=\"Line chart\" title=\"Overtake 2022+ WRX Inlet vs OEM\"\u003e\u003c\/iframe\u003e\u003cscript type=\"text\/javascript\"\u003ewindow.addEventListener(\"message\",function(a){if(void 0!==a.data[\"datawrapper-height\"]){var e=document.querySelectorAll(\"iframe\");for(var t in a.data[\"datawrapper-height\"])for(var r,i=0;r=e[i];i++)if(r.contentWindow===a.source){var d=a.data[\"datawrapper-height\"][t]+\"px\";r.style.height=d}}});\u003c\/script\u003e\u003c\/p\u003e\n\u003ch4\u003eThe factory inlet is aluminum, how is OVERTAKE's any different?\u003c\/h4\u003e\n\u003cp\u003eModern vehicles must prevent fuel vapors from escaping the gas tank, instead routing them to the engine so they can be burned off. When the engine is off, the entire system is sealed - hence the importance of a good gas-cap seal. At idle and under vacuum (no boost), a purge solenoid periodically opens and draws vapors directly into the intake manifold. Under light boost (0–4 psi), manifold pressure is too high to draw vapors in, so the solenoid instead routes them to the turbo inlet, where the natural pressure drop through the air intake creates enough suction. However, there is a flaw in this design. The EVAP sensor is located far away from the inlet and there is a long hose run between the two. This can lead to weak readings at the sensor. To remedy this, Subaru introduced a \"band-aid\" fix by drilling a 4mm hole into the turbo’s compressor housing feeding a venturi-style “ejector.” This intentional boost leak increases airflow through a small channel on the factory inlet, generating an artificial vacuum so the sensor always detects the expected pressure drop while vapors continue entering the turbo.\u003c\/p\u003e\n\u003cp\u003eAt wide-open throttle, the purge solenoid closes, holding the vapors in the tank, but the \"ejector\" continues leaking boost across the venturi into the turbo inlet. As a result, the turbo must spin faster to maintain target boost, raising charge temperatures, reducing intercooler efficiency, and limiting top-end airflow and boost potential. As a precaution, Subaru circulates coolant under the turbo inlet to keep the venturi from freezing, which would disable the EVAP system entirely. This coolant flow drastically heats up the factory turbo inlet to around 200 degrees Fahrenheit, which in-turn heats the air entering your turbo, leading to decreased performance potential.\u003c\/p\u003e\n\u003cp\u003eAs an alternative, the OVERTAKE Turbo Inlet utilizes the engine’s vacuum pump as a direct source to constantly supply only the necessary vacuum level, and places the source closer to the sensor. This pump is only utilized for the power braking system in the factory setup, so as to ensure our kit does not hinder braking performance at all, we include an inline restrictor pill to limit the vacuum levels to the required amount for the sensor to read properly. This preserves proper fuel vapor management, without relying on Subaru’s built-in boost leak. Since we have eliminated the potential for the small ejector orifice to freeze over, we can also bypass the coolant loop through the inlet, which also greatly improves performance potential by allowing fresh, cool air from your intake to enter the compressor side of the turbocharger.\u003c\/p\u003e\n\u003cp\u003eOn top of all of this, the factory Subaru turbo inlet features a couple of internal pockets which are meant to dampen induction sound and increase surface area for inlet warming. These pockets also greatly disrupt the air entering your turbocharger. Our inlet ditches them, allowing for a smooth path of flow and increased intake air velocity.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":45894094520451,"sku":"A10691","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10691-overtake-aluminum-turbo-inlet-22_wrx-3.jpg?v=1772052963"},{"product_id":"overtake-post-maf-hose-elbow-subaru-2015-2021-wrx-2014-2018-forester-xt","title":"OVERTAKE Post MAF Hose Elbow - Subaru 2015-2021 WRX, 2014-2018 Forester XT","description":"\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Post MAF Hose Elbow\u003c\/strong\u003e replaces the molded factory elbow between the airbox and the turbo inlet on the \u003cstrong\u003e2015-2021 WRX and 2014-2018 Forester XT\u003c\/strong\u003e. It is the \u003cstrong\u003esame heat resistant ABS\u003c\/strong\u003e piece that anchors our VB kit, and it runs on your factory couplers, so the swap comes down to one part and a bracket.\u003c\/p\u003e\n\u003cp\u003eThe stock elbow on your car has resonator pockets molded into the wall, and every one of them sits in the path of the air your turbo is asking for.\u003c\/p\u003e\n\u003cp\u003eThose pockets are there for a reason. \u003cstrong\u003eSubaru \u003c\/strong\u003etuned them to pull intake noise out of the cabin, and on a car sold to a broad audience that is the right call. The \u003cstrong\u003eOVERTAKE Post MAF Hose Elbow\u003c\/strong\u003e is built for the 2015-2021 WRX and 2014-2018 Forester XT, taking the other side of that trade, giving up the muting for a smooth interior wall and a consistent bend.\u003c\/p\u003e\n\u003ch4\u003eWhat We Solved:\u003c\/h4\u003e\n\u003cp\u003eThe factory elbow is a solid molded piece with obstructions built into it. Swapping it out clears them without touching anything else in the intake tract:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResonator pockets gone\u003c\/li\u003e\n\u003cli\u003eSmooth interior wall\u003c\/li\u003e\n\u003cli\u003eLarger, consistent radius through the bend, smoother flow\u003c\/li\u003e\n\u003cli\u003eFactory couplers and clamps reused\u003c\/li\u003e\n\u003cli\u003eStock airbox and MAF retained, no tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMolded ABS elbow, heat resistant, smooth interior wall and an OEM-plus exterior finish with OVERTAKE branding\u003c\/li\u003e\n\u003cli\u003eThe same elbow that goes into the OVERTAKE Post MAF Pipe Kit for the 2022-2026 WRX\u003c\/li\u003e\n\u003cli\u003eRuns on your factory couplers and clamps, no silicone included\u003c\/li\u003e\n\u003cli\u003eMatte black powder coated stainless steel bracket that picks up the factory mounting point\u003c\/li\u003e\n\u003cli\u003eTwo mounting bolts included\u003c\/li\u003e\n\u003cli\u003e20 to 30 minute install with hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details:\u003c\/h4\u003e\n\u003cp\u003eIntake noise is a design target on every car Subaru sells, and the post MAF elbow is one of the places they hit it. On the 2015-2021 WRX that elbow is a solid molded piece with resonator pockets built into the wall, positioned to absorb noise before it reaches the cabin. There is no corrugation on this one, since the couplers at each end carry the flex, so the pockets are the whole story. OVERTAKE molds the replacement in heat resistant ABS with a clean interior wall and a consistent radius through the bend, then finishes the outside so it reads as something Subaru could have shipped. The stainless bracket picks up the factory mounting point, which keeps the elbow supported rather than riding on the couplers alone. Reuse your factory couplers and clamps, budget 20 to 30 minutes, and expect the intake to be a little louder than stock once those pockets are gone.\u003c\/p\u003e\n\u003ch4\u003eWhat's In The Box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 OVERTAKE Post MAF Elbow\u003c\/li\u003e\n\u003cli\u003e1 Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e2 Mounting Bolts\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Subaru PN 46011SG000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2021 Subaru WRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2014-2018 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":48136342110339,"sku":"A10800BLK","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10800-overtake-post-maf-pipe-elbow-2015-21-wrx-1.jpg?v=1788888829"},{"product_id":"overtake-post-maf-pipe-kit-subaru-2022-2026-wrx","title":"OVERTAKE Post MAF Pipe Kit - Subaru 2022-2026 WRX","description":"\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Post MAF Pipe Kit\u003c\/strong\u003e replaces the factory post MAF plumbing on the \u003cstrong\u003e2022-2026 WRX \u003c\/strong\u003ewith a\u003cstrong\u003e molded ABS elbow\u003c\/strong\u003e and two \u003cstrong\u003e5-ply silicone couplers\u003c\/strong\u003e. The stock airbox and MAF sensor housing stay put, so nothing about your tune changes.\u003c\/p\u003e\n\u003cp\u003ePull the factory pipe out and look down the inside of it. Two stretches of corrugation and a row of resonator pockets sit directly in the path of everything your turbo is trying to pull.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubaru\u003c\/strong\u003e built that pipe to do two jobs well. The corrugation lets it flex into place during assembly, and the pockets quiet the intake down to something the average driver never notices. Both work as intended, and both come at the cost of a clean path from the airbox to the turbo inlet. The\u003cstrong\u003e OVERTAKE Post MAF Pipe Kit is built for the 2022-2026 WRX \u003c\/strong\u003eand takes the other side of that trade.\u003c\/p\u003e\n\u003ch4\u003eWhy Make the Swap?\u003c\/h4\u003e\n\u003cp\u003eGoing from the factory pipe to a smooth ABS elbow and stepped silicone couplers cleans up the whole run between the airbox and the turbo:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUninterrupted path, no corrugation\u003c\/li\u003e\n\u003cli\u003eNo resonator pockets in the stream\u003c\/li\u003e\n\u003cli\u003eLarger, consistent radius through the bends, smoother flow\u003c\/li\u003e\n\u003cli\u003eCouplers that hold their shape under vacuum\u003c\/li\u003e\n\u003cli\u003eStock airbox and MAF retained, no tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMolded ABS elbow, heat resistant, smooth interior wall and an OEM-plus exterior finish with OVERTAKE branding\u003c\/li\u003e\n\u003cli\u003eTwo 5-ply silicone couplers, steel wire reinforced so they will not collapse or deform under heavy vacuum\u003c\/li\u003e\n\u003cli\u003eStepped coupler design smooths the transition between each segment of the run\u003c\/li\u003e\n\u003cli\u003eMatte black powder coated stainless steel bracket that picks up the factory mounting point on the lower frame rail\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps included, 20 to 30 minute install with hand tools\u003c\/li\u003e\n\u003cli\u003eRetains the federally mandated hydrocarbon filter element in the 2022+ airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details:\u003c\/h4\u003e\n\u003cp\u003eFactory intake plumbing gets designed around assembly line reality and noise targets before it gets designed around airflow. On the VB WRX that means two large corrugated sections so the pipe can flex into position on the line, plus several resonator pockets tuned to keep intake noise out of the cabin. Both features do exactly what Subaru asked of them, and both put obstructions in the path between the airbox and the turbo inlet, with bends abrupt enough to act as choke points on top of that. OVERTAKE went the other direction with a single molded ABS elbow running a consistent radius and a smooth interior wall, joined at each end by a stepped 5-ply silicone coupler that carries the flex the corrugation used to provide. The stainless bracket picks up the factory mounting point on the lower frame rail, so the pipe is supported where Subaru intended rather than riding on the couplers. Expect more intake noise than stock once the pockets are gone, and budget 20 to 30 minutes for the job.\u003c\/p\u003e\n\u003ch4\u003eWhat's In The Box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 OVERTAKE Post MAF Pipe\u003c\/li\u003e\n\u003cli\u003e1 Airbox Coupler\u003c\/li\u003e\n\u003cli\u003e1 Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e1 Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e4 Hose Clamps\u003c\/li\u003e\n\u003cli\u003e2 Mounting Bolts\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Subaru PN 46011VC000 and 46013VC010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2026 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":48136587837571,"sku":"A10799","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/A10799-overtake-post-maf-pipe-kit-2022-26-wrx-1.jpg?v=1788887186"},{"product_id":"overtake-post-maf-pipe-kit-subaru-2015-2021-wrx","title":"OVERTAKE Post MAF Pipe Kit - Subaru 2015-2021 WRX","description":"\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Post MAF Pipe Kit\u003c\/strong\u003e replaces the factory post MAF plumbing on the \u003cstrong\u003e2015-2021 WRX \u003c\/strong\u003ewith a\u003cstrong\u003e molded ABS elbow\u003c\/strong\u003e and two \u003cstrong\u003e5-ply silicone couplers\u003c\/strong\u003e. The stock airbox and MAF sensor housing stay put, so nothing about your tune changes.\u003c\/p\u003e\n\u003cp\u003ePull the factory pipe out and look down the inside of it. Two stretches of corrugation and a row of resonator pockets sit directly in the path of everything your turbo is trying to pull.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubaru\u003c\/strong\u003e built that pipe to do two jobs well. The corrugation lets it flex into place during assembly, and the pockets quiet the intake down to something the average driver never notices. Both work as intended, and both come at the cost of a clean path from the airbox to the turbo inlet. The\u003cstrong\u003e OVERTAKE Post MAF Pipe Kit is built for the 2015-2021 WRX \u003c\/strong\u003eand takes the other side of that trade.\u003c\/p\u003e\n\u003ch4\u003eWhy Make the Swap?\u003c\/h4\u003e\n\u003cp\u003eGoing from the factory pipe to a smooth ABS elbow and stepped silicone couplers cleans up the whole run between the airbox and the turbo:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUninterrupted path, no corrugation\u003c\/li\u003e\n\u003cli\u003eNo resonator pockets in the stream\u003c\/li\u003e\n\u003cli\u003eLarger, consistent radius through the bends, smoother flow\u003c\/li\u003e\n\u003cli\u003eCouplers that hold their shape under vacuum\u003c\/li\u003e\n\u003cli\u003eStock airbox and MAF retained, no tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMolded ABS elbow, heat resistant, smooth interior wall and an OEM-plus exterior finish with OVERTAKE branding\u003c\/li\u003e\n\u003cli\u003eTwo 5-ply silicone couplers, steel wire reinforced so they will not collapse or deform under heavy vacuum\u003c\/li\u003e\n\u003cli\u003eStepped coupler design smooths the transition between each segment of the run\u003c\/li\u003e\n\u003cli\u003eMatte black powder coated stainless steel bracket that picks up the factory mounting point on the lower frame rail\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps included, 20 to 30 minute install with hand tools\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details:\u003c\/h4\u003e\n\u003cp\u003eFactory intake plumbing gets designed around assembly line reality and noise targets before it gets designed around airflow. On the VA WRX that means two large corrugated sections so the pipe can flex into position on the line, plus several resonator pockets tuned to keep intake noise out of the cabin. Both features do exactly what Subaru asked of them, and both put obstructions in the path between the airbox and the turbo inlet, with bends abrupt enough to act as choke points on top of that. OVERTAKE went the other direction with a single molded ABS elbow running a consistent radius and a smooth interior wall, joined at each end by a stepped 5-ply silicone coupler that carries the flex the corrugation used to provide. The stainless bracket picks up the factory mounting point on the lower frame rail, so the pipe is supported where Subaru intended rather than riding on the couplers. Expect more intake noise than stock once the pockets are gone, and budget 20 to 30 minutes for the job.\u003c\/p\u003e\n\u003ch4\u003eWhat's In The Box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 OVERTAKE Post MAF Pipe\u003c\/li\u003e\n\u003cli\u003e1 Airbox Coupler\u003c\/li\u003e\n\u003cli\u003e1 Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e1 Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e4 Hose Clamps\u003c\/li\u003e\n\u003cli\u003e2 Mounting Bolts\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Subaru PNs 46011SG000, 46013VA000, and 46013AJ010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2021 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"OVERTAKE Blue","offer_id":48151931945091,"sku":"A11157BLU","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":48151931977859,"sku":"A11157RED","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":48151932010627,"sku":"A11157BLK","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/files\/a11157blu-overtake-post-maf-pipe-kit-15-21-wrx-blue-1.jpg?v=1788983697"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/0879\/8083\/collections\/DESKTOP-Post-MAF-VB.jpg?v=1789050305","url":"https:\/\/overtakeusa.com\/collections\/2015-2026-wrx-stage-1-intake-upgrades.oembed","provider":"OVERTAKE","version":"1.0","type":"link"}