Overtake Adjustable Exhaust Hanger - 12mm - Subaru 2008+ WRX / STi
Choose options
Overtake Adjustable Exhaust Hangers | Less Slop & More Adjustability
Tired of your fancy catback flopping around on the factory exhaust hangers and knocking against the chassis? Here at Overtake, we have the solution for you. Our Adjustable Exhaust Hangers are specifically designed to lock down the position of your exhaust to prevent obnoxious rubbing. On top of just holding your exhaust in place, our hangers feature dual hanging lengths to allow you to fine tune the positioning of your piping to clear the underside of your car and align the tips properly with your bumper.
Molded from a striking blue 70A durometer polyurethane, our hangers offer a substantial upgrade in rigidity over the factory rubber hangers, while still being pliable enough for a hassle-free installation. The 12mm hanger diameter is the perfect fit for most 2008 and up Subaru models, especially the WRX and STI!
Available either as an individual hanger or in a pack of 4 to replace both of the rubber hangers on each muffler. If you want to replace the 5th hanger on your midpipe as well, you will need to pick up one additional hanger.
Key Benefits:
- 70A Durometer Polyurethane: Stiffens up the exhaust system while still being pliable enough for an easy installation.
- Dual Position Hanger: Options for hanging at 1.5" and 2" to dial in the fitment of your catback exhaust.
- 12mm Hanger Provisions: A perfect fit for most 2008+ Subaru models, including all WRX and STI models
Customer Reviews
I recently purchased the overtake rubber exhaust hangers so my exhaust would line up correctly and the installation was so easy the exhaust hangers slid right on. I highly recommend these if you have an aftermarket exhaust on your Subaru.
Amazing piece of quality exhaust hangers. I bought the four-pack as well as another single exhaust hanger and I’m sure glad I did. Allowed me to place my Invidia Q300 higher and more aligned to the rear diffuser. Must have quality pieces. Also gives the undercarriage a little bit of love and color as well.
Amazing piece of quality exhaust hangers. I bought the four-pack as well as another single exhaust hanger and I’m sure glad I did. Allowed me to place my Invidia Q300 higher and more aligned to the rear diffuser. Must have quality piece.
Bought this for my VB to fix saggy exhaust and adjust tips to fit the exhaust well. These have multiple ways of adjustability with two hanger openings for different length and inverting the direction of the hangers. Have not seen any other hanger designed this way. Kudos.
I have a VB WRX with a 3” exhaust from the j-pipe back. Due to the increased pipe diameter at the y-pipe (near the connection to mid pipe), my differential carrier bracket was very close to rubbing the exhaust. Looking at the pipe, it did rub a few times, and was super close. Despite adjusting the exhaust connections, the issue was simply the hanger placement and the larger diameter pipe. Enter Overtake’s adjustable exhaust hanger!
This hanger provides an additional hole that is .5” lower than the stock hanger. Which provides just enough room for your larger aftermarket exhaust to hang freely without any clearance issues. The hanger is STIFF, you can’t bend it. So I am 100% sure it won’t move around and won’t cause the exhaust to “jump up” and hit the bracket. I also have the Rear Differential bushing kit which provides bushings for that carrier arm to stiffen it up, too.
Very satisfied with this product. Quick shipping, worked perfectly and as intended.
