OVERTAKE Adjustable Exhaust Hanger - 15mm - Subaru 2002-2007 WRX, 2004-2007 STI, 1993-2007 Impreza
Order within calculating….
Choose options
Order within calculating….
Order within calculating….
Overtake Adjustable Exhaust Hangers | Less Slop & More Adjustability
Tired of your fancy catback flopping around on the factory exhaust hangers and knocking against the chassis? Here at Overtake, we have the solution for you. Our Adjustable Exhaust Hangers are specifically designed to lock down the position of your exhaust to prevent obnoxious rubbing. On top of just holding your exhaust in place, our hangers feature dual hanging lengths to allow you to fine tune the positioning of your piping to clear the underside of your car and align the tips properly with your bumper.
Molded from a striking blue 70A durometer polyurethane, our hangers offer a substantial upgrade in rigidity over the factory rubber hangers, while still being pliable enough for a hassle-free installation. The 15mm hanger diameter is the perfect fit for most 1993-2007 Subaru models, especially the WRX, STI, and Forester XT!
Available either as an individual hanger or in a pack of 3 to replace both of the rubber hangers on the muffler as well as the hanger for the midpipe. This hanger is a high performance replacement for OEM Subaru 44031AA020, 44066AE00B, 44066AE00A.
Key Benefits:
- 70A Durometer Polyurethane: Stiffens up the exhaust system while still being pliable enough for an easy installation.
- Dual Position Hanger: Options for hanging at 1.5" and 2" to dial in the fitment of your catback exhaust.
- 15mm Hanger Provisions: A perfect fit for most 1993-07 Subaru models, including all WRX and STI.
- 2002 Subaru WRX
- 2003 Subaru WRX
- 2004 Subaru WRX
- 2005 Subaru WRX
- 2006 Subaru WRX
- 2007 Subaru WRX
- 2004 Subaru STI
- 2005 Subaru STI
- 2006 Subaru STI
- 2007 Subaru STI
- 2003 Subaru Forester
- 2004 Subaru Forester
- 2005 Subaru Forester
- 2006 Subaru Forester
- 2007 Subaru Forester
- 2008 Subaru Forester
- 2004 Subaru Forester XT
- 2005 Subaru Forester XT
- 2006 Subaru Forester XT
- 2007 Subaru Forester XT
- 2008 Subaru Forester XT
- 1993 Subaru Impreza
- 1994 Subaru Impreza
- 1995 Subaru Impreza
- 1996 Subaru Impreza
- 1997 Subaru Impreza
- 1998 Subaru Impreza
- 1999 Subaru Impreza
- 2000 Subaru Impreza
- 2001 Subaru Impreza
- 2002 Subaru Impreza
- 2003 Subaru Impreza
- 2004 Subaru Impreza
- 2005 Subaru Impreza
- 2006 Subaru Impreza
- 2007 Subaru Impreza
I had absolutely horrible luck with my exhaust it actually melted my bumper thankfully I was able to get these and fix that completely so much better than OEM the quality is amazing and they shipped extremely fast 10 out of 10
Perfect fit and easy install
Seriously the best replacement exhaust hanger out there. Replaced all of mine when I replaced the exhaust, the quality and adjustability is truly amazing! Video of my install and impressions. Definitely looking forward to what you guys come up with next.
https://youtu.be/MITTeuIWGLI
This is a 1000% must have when installing an aftermarket axleback/exhaust….Especially when forums mention how a particular brand can have alignment issues. Installed a remark axle back that was known to have alignment issue so I purchase the OVERTAKE adjustment hanger. Both Remark mufflers were put on the 1.5 inch setting on the hanger and the left side with nicely tucked but it was rubbing on the exhaust. I left the right side alone on 1.5 because it was perfectly fine and wasn’t rubbing, the left side I dropped to 2 inches. So right is on 1.5 and left is on 2 inches. This solve my problem without and tweaking or exhaust removal. Literally just dropped the left side to 2 inches on the hanger with a hanger removal tool and corrected the problem in my garage in under 5 mins.
With the right tools, my Subaru has become less shakey and now sounds even better on the hwy. Be sure to order 5 if you’re doing them all!
Amazing piece of quality exhaust hangers. I bought the four-pack as well as another single exhaust hanger and I’m sure glad I did. Allowed me to place my Invidia Q300 higher and more aligned to the rear diffuser. Must have quality piece.
I have a VB WRX with a 3” exhaust from the j-pipe back. Due to the increased pipe diameter at the y-pipe (near the connection to mid pipe), my differential carrier bracket was very close to rubbing the exhaust. Looking at the pipe, it did rub a few times, and was super close. Despite adjusting the exhaust connections, the issue was simply the hanger placement and the larger diameter pipe. Enter Overtake’s adjustable exhaust hanger!
This hanger provides an additional hole that is .5” lower than the stock hanger. Which provides just enough room for your larger aftermarket exhaust to hang freely without any clearance issues. The hanger is STIFF, you can’t bend it. So I am 100% sure it won’t move around and won’t cause the exhaust to “jump up” and hit the bracket. I also have the Rear Differential bushing kit which provides bushings for that carrier arm to stiffen it up, too.
Very satisfied with this product. Quick shipping, worked perfectly and as intended.
I got this to fix one side of the wifes axleback that was sitting too high in the bumper. Fixed the issue right away. Super good quality!!
Perfect length for performance aftermarket muffler install. OEM hangers were too short.
Love the product. Easy install. Strong and durable. Love the adjustability. My exhaust is perfectly centered. And….the blue is growing on me 😁
Better than oem
Perfect solution for an aftermarket exhaust! Pipe on my xforce varex catback was touching one of the rear CV axle boots. using the 2" hole I was able to get a nice amount of clearance to keep everything nice and safe! Great quality too
Awesome and way better than Remark hangers because they dry rotted in like 6 years. Overall good quality! Thanks for the sticker
Great product and fast shipping as always!!!
Super beefy hangers with multiple holes for adjusting your custom exhaust.
I mistakenly ordered for the wrong year hanger so I reached out to Overtakeusa and Doug was quick to change the order before it shipped out.
Just another example of the excellent customer service to expect when ordering from Overtakeusa.
These helped fix the uneven exhaust height i had, just make sure you got a set of vice grips or something similar to get the old hangers off.
Very good product 👌
Seriously, when is the last time you checked your exhaust hangers? Pull one of those nasty stock hangers off and compare it's firmness against these Overtake adjustable exhaust hangers and you'll realize why this is a needed improvement. The fact they are adjustable is icing on the cake when you change your exhaust even once.
These adjustable exhaust hangers are super beefy and the adjustability makes install and clearance not an issue.
Don't hesitate to purchase these if you're looking for exhaust hangers. You won't be sorry.
Another quality product from Justin, Art and the rest of the team.
Thanks guys!
👍
Perfect replacement. Built well and easy to install. I dont have to worry about my exhaust melting anything now. The decals and magnet were an amazing bonus. Highly recommend!
Perfect replacement. Built well and easy to install. I dont have to worry about my exhaust melting anything now. The decals and magnet were an amazing bonus. Highly recommend!
Best exhaust hangers ever! Killer fitment and adjustability. Plus the color’s cool too.
The exhaust hangers, perfection. I had to install the awe tuning track to touring conversion on my sti mainly because my kiddo said it was way too loud. These were brilliant! Probably the easiest hangers to use. Congrats on a fantastic product!
Love the Blue...good quality upgrade a must when changing out the exhaust