OVERTAKE Intake Manifold to Engine Gasket Set - Subaru EG33 Engines
Order within calculating….
Choose options
Order within calculating….
Order within calculating….
The OVERTAKE Intake Manifold to Head Gasket seals the lower intake manifold to the cylinder head on the EG33 Subaru SVX. It is a heavier-duty replacement for a factory gasket Subaru no longer sells, and it ships as a set of two so you have what you need to reseal both sides. Anytime the intake comes off an SVX, this is a gasket you want to replace rather than reuse, and finding a good one has gotten harder now that the OEM part is discontinued.
Why Replace It:
Once a gasket has been torqued down and heat-cycled, reusing it is asking for a leak, so fresh gaskets are the right move any time the intake is off:
- Fresh seal every time the intake comes off
- Direct OEM replacement, no longer available new
- Heavier-duty than a reused factory gasket
- Set of two, enough for both sides
FEATURES:
- Seals the lower intake manifold to the cylinder head on the EG33
- Heavier-duty replacement for the original OEM gasket
- Ships as a set of two, enough to reseal both sides
- Recommended any time the intake manifold is removed
- Direct replacement for the discontinued OEM Subaru gasket 14035AA140
THE DETAILS:
The lower intake manifold gasket is one of those parts you should not reuse once it has been torqued down and heat-cycled, so any time the manifold comes off an EG33 SVX it is worth going back together with fresh gaskets. The problem is that Subaru discontinued the original (14035AA140), and clean OEM examples are getting scarce. The OVERTAKE Intake Manifold to Head Gasket is a heavier-duty replacement built to reseal that joint properly, and it comes as a set of two so both sides get done in one go. It also carries over to EG33 swap builds, where sourcing the right gasket at all is often the hard part. Install is a straight OEM-style replacement during intake reassembly.
What's In The Box:
- 2 OVERTAKE Intake Manifold to Head Gaskets
APPLICATIONS:
- 1992-1997 Subaru SVX
- Also fits EG33 swap applications
- 1992 Subaru SVX
- 1993 Subaru SVX
- 1994 Subaru SVX
- 1995 Subaru SVX
- 1996 Subaru SVX
- 1997 Subaru SVX
Great quality / product. Just got the wrong size for the gasket. I believe I need a 2.5 inch diameter gasket for my Cobb downpipe.
Another nice gasket set from Overtake. The intercooler inlet gaskets are good quality, nice and thick, and fit perfectly on my 2003 WRX. Great replacement for the old gaskets, especially when you already have the intercooler off and want to make sure everything is sealed up properly when it goes back together.
Nice quality gasket. It’s thick, well made, and fit my 2003 WRX intercooler BPV perfectly. Compared it with the OEM gasket and the fit was right on. Definitely a good replacement if you’re taking the intercooler or BPV apart and want to make sure everything seals back up properly.
Arrived just in the time it said it was and it fits perfectly! The reason I ordered it is because I asked a question and they responded with an answer asap! Customer service is where it counts!
I highly recommend the overtake 2.25-2.5 inch axleback gaskets to replace all those composite gaskets because the overtake gaskets are MLS and they work we better and you don’t have to worry about them blowing out.
Good quality, definitely will use for all my cars
The gasket is larger then the OEM one so should let more air though.
Thank you so much for your team to helping me out to pick the right gasket for my 2017 subaru wrx sti...
Very nice quality parts, fast shipping.
Great gaskets, nicer than OEM.
This is a must get product..helps eliminate exhaust leak material is phenomenal. Well made.
Got a new downpipe, so a gasket was needed, and this thing is way more durable than OEM. The quality is on point!! 👌 thanks again Overtake for a good product!!
Very good gaskets that are super thick & for high-performance aftermarket headers & EXHAUSTS. If you have a leak, highly recommend this part will fix it 10/10 thx you (overtakeusa)
Top of the line gaskets that are super thick!!! highly recommend them! Check them out at overtakeusa.com
Wifes STI needed pretty much every exhaust gasket. These fit with the Invidia cat-back 2.5" exhaust sections!
Great quality and amazing packaging
Great quality and beautiful packaging
The Best!!
The Best!!
Great experience! Art walked me through everything, gave me some advice without being pushy about trying to sell me more. Definitely my best experience at subifest Midwest.
Quality gaskets was surprised how thick the manifold gaskets were. These came up in Google Ai for recommendation and i see why now.
Great product worked as it should would buy agin to fix my leaky exhaust
Way thicker and better material than oem gaskets. When I need a gasket quick I order from these guys!
My car eats gaskets. So everytime I have to replace it this donut is always in great shape.