OVERTAKE Post MAF Pipe Kit - Subaru 2015-2021 WRX
Choose options
The OVERTAKE Post MAF Pipe Kit replaces the factory post MAF plumbing on the 2015-2021 WRX with a molded ABS elbow and two 5-ply silicone couplers. The stock airbox and MAF sensor housing stay put, so nothing about your tune changes.
Pull the factory pipe out and look down the inside of it. Two stretches of corrugation and a row of resonator pockets sit directly in the path of everything your turbo is trying to pull.
Subaru built that pipe to do two jobs well. The corrugation lets it flex into place during assembly, and the pockets quiet the intake down to something the average driver never notices. Both work as intended, and both come at the cost of a clean path from the airbox to the turbo inlet. The OVERTAKE Post MAF Pipe Kit is built for the 2015-2021 WRX and takes the other side of that trade.
Why Make the Swap?
Going from the factory pipe to a smooth ABS elbow and stepped silicone couplers cleans up the whole run between the airbox and the turbo:
- Uninterrupted path, no corrugation
- No resonator pockets in the stream
- Larger, consistent radius through the bends, smoother flow
- Couplers that hold their shape under vacuum
- Stock airbox and MAF retained, no tune
Features:
- Molded ABS elbow, heat resistant, smooth interior wall and an OEM-plus exterior finish with OVERTAKE branding
- Two 5-ply silicone couplers, steel wire reinforced so they will not collapse or deform under heavy vacuum
- Stepped coupler design smooths the transition between each segment of the run
- Matte black powder coated stainless steel bracket that picks up the factory mounting point on the lower frame rail
- Stainless steel hose clamps included, 20 to 30 minute install with hand tools
The Details:
Factory intake plumbing gets designed around assembly line reality and noise targets before it gets designed around airflow. On the VA WRX that means two large corrugated sections so the pipe can flex into position on the line, plus several resonator pockets tuned to keep intake noise out of the cabin. Both features do exactly what Subaru asked of them, and both put obstructions in the path between the airbox and the turbo inlet, with bends abrupt enough to act as choke points on top of that. OVERTAKE went the other direction with a single molded ABS elbow running a consistent radius and a smooth interior wall, joined at each end by a stepped 5-ply silicone coupler that carries the flex the corrugation used to provide. The stainless bracket picks up the factory mounting point on the lower frame rail, so the pipe is supported where Subaru intended rather than riding on the couplers. Expect more intake noise than stock once the pockets are gone, and budget 20 to 30 minutes for the job.
What's In The Box:
- 1 OVERTAKE Post MAF Pipe
- 1 Airbox Coupler
- 1 Inlet Coupler
- 1 Mounting Bracket
- 4 Hose Clamps
- 2 Mounting Bolts
- Replaces OEM Subaru PNs 46011SG000, 46013VA000, and 46013AJ010
Applications:
- 2015-2021 Subaru WRX
- 2015 Subaru WRX
- 2016 Subaru WRX
- 2017 Subaru WRX
- 2018 Subaru WRX
- 2019 Subaru WRX
- 2020 Subaru WRX
- 2021 Subaru WRX
Bought this with the hoses that go before and after the MAF elbow. With everything assembled, it fit almost perfectly but into my 2017 Forester XT.
Only thing I will have to do when it gets warmer is to get the alignment of the tubes better and see if that fixes the air box alignment with the bolts.
Overall very pleased with the fitment.
Bought this with the hoses that go before and after the MAF elbow. With everything assembled, it fit almost perfectly but into my 2017 Forester XT.
Only thing I will have to do when it gets warmer is to get the alignment of the tubes better and see if that fixes the air box alignment with the bolts.
Overall very pleased with the fitment.
Super easy to install and looks great
Super easy install
Smoother piping than stock, looks and feel good, and super easy to install. I like it!
I got this kit along with the inlet and definitely big huge massive difference, along with the high quality material, the overall performance is noticeable and the sound of the turbo heightened
It's crazy how much baffling and unnecessary obstruction the factory intake piping includes. This eliminates all of that providing a clean, smooth path for airflow to get to the turbo without delay. You get the added benefit of a little more intake induction noise as well which has got to be one of coolest sounds to hear while accelerating! Installation was quick and easy with Overtake's installation video and I'm finding that I'm holding 2psi higher while in WOT between this and the post -MAF hoses!
The overwhelming results behind installing the OverTake piping kit has taken my intake project to a whole new level level. Hope to do more with them in the future!!!
Great quality and a big upgrade from factory!
Great kit to get rid of the factory hoses. Finish was great and good clamps.
These things are legit! Thank you guys for the amazing product!!! Look forward to buying some more goodies!!!
Excellent Product.
Amazing Quality Easy to Install
Amazing Quality much better sound and performance over OEM
I'm eagerly awaiting the full Overtake intake system, so I was excited to get as close as I could to it in the meantime with the Post-MAF hose and Elbow bundle. Installation was quick and easy with Overtake's YouTube videos, my induction sounds are wonderful, and I'm holding 2psi higher at WOT as compared to before. I highly recommend anyone still running the full stock intake system to smooth out their intake tract with Overtake's Post-MAF bundle ASAP!
Subaru may have thought we wanted to hear less intake induction, but I want all the induction noise I can get. These hoses are beautiful (I got Overtake blue) and extremely well constructed. Between the post-MAF hoses and the rotomolded elbow, I'm able to sustain 2psi higher during WOT than previously! I definitely recommend for anyone looking to clean up their intake path.
Great upgrade !!!!
Much more durable & high quality than stock post MAF boots are
Very nice upgrade from stock. Can definitely tell a difference in the throttle response. Can’t wait until the intake systems are released.
NO COMPLAINS HERE. EVERYTHING IS GOOD WITH THIS NEW RELEASE.
Really nice part. Great quality.
This post maf kit was exactly what I was hoping for. paired with a drop in overtake filter and my turbo inlet the turbo spool sounds amazing.
Great quality part and very easy install. Highly recommend if you already have the post maf hose kit.
Fast shipping and great looks and quality!
Installed the post maf hoses along with drop-in filter and it's a nice upgrade to the factory airbox, no tuning needed and no CEL's to worry about.
Great product and easy straight forward install.
Such a great upgrade compared to the stock accordion style hose. Easy to insall, and will help smooten the air flow to the turbo!